Table of Contents
Advertisement
MACHINE OPERATIONS AND CONTROLS
The blade returns parallel to the design surface (T).
(S) Current surface
BLADE LOAD MODE SETTINGS
(In cutting and carry mode)
Set the blade load mode so that the digging depth matches the
type of work.
Each time "Blade load selection" is pressed, 3 modes switches
in order.
Blade load
Digging depth
mode
(A) Light
Approx. 10 cm
(B) Normal
Approx. 15 cm
(C) Heavy
Approx. 20 cm
3-42
Type of work
Shallow and long digging
Normal operation
Deep and short digging
OPERATION
Advertisement
Chapters
Table of Contents
