Table of Contents
Advertisement
OPERATION
INPUT PITCHING ROD LENGTH
The length of pitching rod must be inputted when the blade edge has been adjusted. Measure the length of
pitching rod and input it.
Finishing accuracy of the blade automatic control is decreased if the machine is operated with the pitching rod
of wrong length.
For the adjusting method of the blade edge angle, see Operation and Maintenance Manual for the standard ma-
chine, "OPERATION", "METHOD FOR ADJUSTING ANGLE OF BLADE EDGE".
1.
Stop the machine on a level place.
2.
Lower the blade to the ground.
3.
Operate the work equipment lock lever (1) and parking
brake lever (2) by holding the operating portions on the
top, place the levers in LOCK position (L)
4.
Stop the engine.
5.
Measure the distance (a) between joints of pitching rod (3).
MACHINE OPERATIONS AND CONTROLS
3-23
Advertisement
Chapters
Table of Contents
