Example Point-To-Point Configuration; Example Shared Access To Network-Based Services Configuration - Paradyne ACCULINK 316x Operator's Manual

ACCULINK 316x DSU/CSU
In addition, a 3160 DSU/CSU, acting as an SNMP
agent, can be connected to and managed from an SNMP
management system in one of two ways:
Serial connection via the COM or MODEM port to
an SNMP management system using either
Point-to-Point Protocol (PPP) or Serial Line
Internet Protocol (SLIP) (Figure 2-5).
LAN
ROUTER
3160/3164 DSU/CSU
PBX
LAN
ROUTER
Figure 2-2. Example Shared Access to Network-Based Services Configuration
2-2
T1
NETWORK
ACCULINK
Figure 2-1. Example Point-to-Point Configuration
DSU/CSU
Serial connection via the COM or MODEM port
(using PPP or SLIP) through a network device (e.g.,
router) that supports IP routing to the network
management system (Figure 2-6).
T1
ACCULINK
3160/3164 DSU/CSU
NETWORK
SERVICES
December 1996
LAN
ROUTER
496-14296-03
496-14312-03
3160-A2-GB22-10