Voice Interface Specific Definitions, Voice, (Attp-Interfaces 4); Ds1 Interface Configuration Table, Ent-Ds1, (Attp-Interfaces 5); Ds1 Performance Statistics Group, Ds1Perfstats, (Ent-Ds4); Channel Configuration, Crossconnect, (Attp-Interfaces 7) - Paradyne 9161 Reference Manual

Port Usage Table, attp-devPortUsage. PortUsage, (attp-interfaces 3)
The Port Usage table is supported for the COM port and EDLs only. It specifies
whether the COM port is configured for the asynchronous terminal interface,
ASCII alarms, or as an IP management link. The value other(4) is not supported
for the COM port. The values alarm(1), terminal(2) and other(4) are not
supported for the EDLs.

Voice Interface Specific Definitions, voice, (attp-interfaces 4)

The Voice Interface specific definitions (devVoice.mib) contain objects used to
manage the voice interface in the unit. This object is fully supported.

DS1 Interface Configuration Table, ent-ds1, (attp-interfaces 5)

The DS1 Interface Configuration table (devDS1Config.mib) contains objects used
to configure the DS1 related items. This object is fully supported for the Network
and DSX-1 T1 interfaces.

DS1 Performance Statistics Group, DS1PerfStats, (ent-ds4)

The DS1 Performance Statistics group (devDS1PerfStats.mib) contain objects
used to access the Telco and user performance registers maintained for the
network T1 interface. The Telco-related objects are extensions to the DS1/E1 MIB
(RFC 1406). The user-related objects are used to mirror the Telco objects, but
provide the additional capability to reset the user registers. This object is fully
supported.
Synchronous Data Port Configuration, syncPort, (attp-interfaces 6)
The Synchronous Data Port Configuration group (devDataPortConfig.mib) is used
to manage the synchronous data ports. This object is fully supported.
EDL Near-end and Far-end Registers, dataPortPerStats, (syncPort 4)
The EDL Near-end Registers groups (devEDLPerfStats.mib) are used to retrieve
performance statistics for the network allocated channels associated with a given
synchronous data port. This object is fully supported.

Channel Configuration, crossConnect, (attp-interfaces 7)

The Channel Configuration group (devCrossConnect.mib) contains two tables,
the DS1 Fractional table and the Synchronous Data Port Assignment table.
These objects are used to manage cross connections between the interfaces.
This object is fully supported.
9161-A2-GH30-20 September 1997
MIB Descriptions
B-31