Displaying Unit Identity - Paradyne 3350 User Manual

Displaying Unit Identity

The identity of the E1 NTU (serial number, model
number, software revision level, hardware revision level,
and customer identification) is available through the
Status branch of the front panel menu (see Appendix A,
Front Panel Menu).
The customer identification is the only identity number
you can change.
To display the E1 NTU's identity (ID),
1. From the top-level menu screen, select Stat.
E1 HDSL NTU
Stat
F1
2. From the Status screen, press the
ID selection appears on the screen.
Status:
HDSL DevHS STest
F1
3. Select ID.
Status:
TStat
F1
3350-A2-GB20-10
Test Cnfig
F3
F2
key until the
F2 F3
LED ID
F2 F3
June 1996
4. The following screens appear in the order listed
each time you press the
Identity:
Ser= xxxxxxx
F1 F2
Identity:
Mod= xxxx - xx - xxx
F1 F2
Identity:
Cust ID= xxxxxxxx
F1 F2
Identity:
SRev= xx . xx . xx
F1 F2
Identity:
CCA1= xxxx - xxx
F1 F2
Identity:
CCA3= xxxx - xxx
F1 F2
Operation
key.
F3
F3
F3
F3
F3
F3
3-7