43: Frequency Transient Taper L, A; 44: Frequency Transient Taper T, A 2; 45: Frequency A 3; 46: Frequency A - BRUEL & KJAER 2032 Instruction Manual

12.6.3. 42: Frequency Transient Length,
Ao
Defines the length in number of frequency elements for Frequency Transient Weighting
or
Defines the length in number of frequency elements for Frequency Exponential
W~ight­
ing
or
Defines the coefficient A
0
for Frequency User-defined Weighting.
12.6.4. 43: Frequency Transient Taper L, A
1
Defines the length in number of frequency elements of a leading half-cosine taper
added to the Frequency Transient Weighting
or
Defines the coefficient A
1
for Frequency User-defined Weighting.
12.6.5. 44: Frequency Transient Taper T, A
2
Defines the length in number of frequency elements of a trailing half-cosine taper
added to the Frequency Transient Weighting
or
Defines the coefficient A
2
for Frequency User-defined Weighting.
12.6.6. 45: Frequency A
3
Defines the coefficient A
3
for Frequency User-defined Weighting.
12.6.7. 46: Frequency A
4
Defines the coefficient A
4
for Frequency User-defined Weighting.
12.6.8. 47: Weighted Frequency Response U
138
Special Parameter 47 allows the display of an Autospectrum, Cross Spectrum or Fre-
quency Response Function on the upper trace to be varied. The Parameter can be set
to 0, 1, or 2.
0: gives normal display of the Frequency Response Function
1: displays the frequency weighting function
2: displays the Frequency Response Function multiplied by the frequency weighting
function.