Table of Contents
Advertisement
5.4.4. The Sideband Cursor
Sideband Cursor
Fig.5.24.
The Sideband Cursor Control Fields
The Sideband Cursor is used to identify sets of sidebands in frequency domain func-
tions. The centre frequency is selected via the X field and the DISPLAY "Set Special
Cursors" push key, see Section 4.2.3. Up to 32 Sideband Cursors, (16 either side of the
centre frequency) will be displayed. The sideband spacing may be adjusted in steps of
Ll F /32 via the Ll X field, (Ll F equals the line spacing).
SlOB Y
:
XXX
x:D
~x:D
83
Advertisement
Table of Contents
