Table of Contents
Advertisement
5.4.3. The Harmonic Cursor
82
Harmonic Curcor
Fig.5.23.
The Harmonic Cursor Control Fields
The Harmonic Cursor is used to identify sets of harmonics in frequency domain func-
tions. The fundamental can be selected via the X field and the DISPLAY
"Set
Special
Cursors" pushkey, see Section 4.2.3. Up to 128 Harmonic Cursors will be displayed.
The harmonic spacing may be adjusted in steps of
~
F /32 via the
~X
field,
(~
F equals
the line spacing).
HARM Y: XXX
x:D
~x:D
Advertisement
Table of Contents
