Table of Contents
Advertisement
2.
INSTALLATION AND GROUNDING CONSIDERATIONS
2.1. INSTALLATION
2.1.1. Environment
2.1.2. Mounting
The Dual Channel Signal Analyzer Type 2032 is designed to be operated in environ-
ments with temperatures of from
+soc
to
+
40°C, and a relative humidity of up to
90%, (non condensing,
+soc
to
+
30°C). To prevent possible overheating, the supply
of cooling air to the air-vents on the right hand side of the analyzer as well as the
exhaust vents on the rear must be unimpeded.
The 2032 can be used free standing on a bench, or can be adapted for mounting in a
19" rack using Rack Mounting Flanges Kit KS 0027. The flanges may be attached as
follows:
1.
Disconnect all power supplies from the 2032 before removing its protective pan-
els.
2.
Slide out the bottom panel of the 2032 cabinet about S em and unclip the plastic
retaining clips to be found at the front of the lower edges of the 2032.
3.
The covers retained by the clips may now be slid out to expose the rack mounting
points of the 2032, shown in Fig.2.1.
4.
Screw on the Rack Mounting Flanges KS 0027. Power to the 2032 may only be
reconnected when the bottom panel of the 2032 is back in place.
Location of
rack mounting
pointsL----_____:~:,&.j
on the 2032
Fig.2. 1.
Points for attaching rack mounting flanges
9
Advertisement
Table of Contents
