Table of Contents
Advertisement
12.3.7. 1/0 Address Switch
7. 110 ADDRESS SWITCH
l
2
31
This parameter shows the setting of the 1/0 ADDRESS SWITCH, on the rear panel of
the 2032. The setting cannot be altered from the Special Parameter field. On delivery
of the 2032, the switch is set to 26
10
(= 32
8 ),
but addresses of from 0
10
to 31
10
can be
manually selected from the 2032 rear panel. See the separate IEC interface manual for
details.
12.3.8. Interface Terminator
132
8. INTERFACE TERMINATOR
This parameter allows the separator for IEC/IEEE interface messages to be selected,
see the separate IEC interface manual for details. Note that for transmission to a
Digital Cassette Recorder Type 7400, it should be set to 3,
(=
ETX). For transmission
to a Graphics Recorder Type 2313, it should be set to 3, or 10, (
=
LF). It is automati-
cally set to 3 with SYSTEM RESET 9.
Advertisement
Table of Contents
