10.1.9. MEASUREMENT SETUP 19
MEASUREMENT SETUP 19 selects Dual Spectrum Averaging in Baseband mode with a
1 ,6 kHz Frequency Span. It is intended for use with the
Bru.
e l & Kjoor Impact Hammer
Type 8202.
10.1.10. MEASUREMENT SETUP 20
MEASUREMENT SETUP 20 selects Dual Spectrum Averaging in Baseband mode with a
1 ,6 kHz Frequency Span. It is intended for use with Shaker testing.
10.2. THE FIXED DISPLAY SETUPS
10.2.1. DISPLAY SETUP 11
DISPLAY SETUP 11 selects display of the Autospectrum Ch.A. It is for general purpose
use.
123