2.
Press SETUP LABEL "Display" once or twice
3.
Press "Autoscale".
Autoscale is aborted by pressing any other pushkey before the auto-
scale's completion. During an autoscale, the message "AUTOSCAL-
ING IN PROGRESS" appears on the 2032 Display.
"Format" -
is used to select the appropriate display format. Where
no MEASUREMENT SETUP is shown on the 2032 Display, the possi-
bilities are:
1.
Dual trace format, trace U and L, (U: upper trace, L: lower trace)
2.
Full format, trace U
3.
Full format, trace L
Traces U and L are the two traces defined by the two DISPLAY SET-
UPs in use.
If the MEASUREMENT SETUP is displayed, the possibilities are:
1.
Single trace U with the MEASUREMENT SETUP
2.
Single trace L with the MEASUREMENT SETUP
"Measurement setup" -
displays the current MEASUREMENT SETUP
on the lower half of the 2032 Display. The currently displayed MEA-
SUREMENT SETUP is always the one in use during an ongoing mea-
surement. If the 2032 is in RECORD "Stop", any new measurement
will begin with the currently displayed MEASUREMENT SETUP.
Repeatedly pressing "Measurement Setup" toggles the Display be-
tween a dual trace or single trace full format display and a single
trace format display with the MEASUREMENT SETUP.
33