Table of Contents
Advertisement
5.3.1. Function
64
Fig.5.
13.
The Function Control Field
The Function control field sets which measured functions are displayed. Precisely
which functions can be displayed will depend on the selected Measurement Mode, for
instance, display of an Enhanced Spectrum requires that Signal Enhancement Mode is
selected.
The Function field can be listed by indexing the Field Selector to the Function field and
pressing the upper right hand (blank) pushkey of the 2032 numeric keyboard. Illegal
functions for the selected measurement mode will be indicated by a minus sign. To
return to a normal display, press the pushkey a second time.
0. TIME CH. A
12. ENH. SPEC. A
24. NON. COH. POWER*
1. TIME CH. 8
13. ENH. SPEC. 8
25.
AUTO CORR. CH. A
2. TIME A vs. 8*
14. AUTO SPEC. A*
26. AUTO CORA. CH. 8
3. ENH. TIME A
15. AUTO SPEC. S *
27. CROSS CORR.
4. ENH. TIME S
16. CROSS SPEC.
28. IMPULSE RESPONSE
5.
ENH. TIME A vs. S*
17. FREQ. RESP. H
1
29. SOUND INTENSITY*
6. PROS. DENS. A*
18. 1/FREQ. RESP. H
1
30. CEPSTRUM CH. A**
7.
PROS. DENS. S*
19. FREQ. RESP. H
2
31. CEPSTRUM CH. S* *
8. PROS. DIST. A*
20.
1 /FREQ. RESP. H
2
32. LIFT SPEC. CH
.
A*
9.
PROS. DIST. S*
21. COHERENCE*
33. LIFT SPEC. CH. S*
10. INST. SPEC. A
22. SIG/NOISE RATIO*
11. INST.
SPEC.
S
23. COHERENT POWER*
• Selection of these functions disables and removes the Coordinates field from the 2032 Display,
since the functions can only be real-valued.
• • Can only be displayed as real part, imaginary part, or magnitude.
Advertisement
Table of Contents
