3.5.
THE DISPLAY SETUP
20
•
FREQ RESP HI
~RG
r
18 JdB
80d8
X
OM! • 6 4kHz
L!H
Fig.3.5.
Example of a DISPLAY SETUP
The measurement conditions are defined by the MEASUREMENT SETUP. Any measure-
ment made using a particular MEASUREMENT SETUP gives the user the possibility of
choosing many different ways of displaying the results. The display and presentation of
the results is defined by the DISPLAY SETUP. An example of a DISPLAY SETUP is
shown in Fig.3.5. Parameters in the DISPLAY SETUP can be changed both during and
after a measurement.
The DISPLAY SETUP parameters are:
Setup Label Display
Function
Function Coordinates
A-Weighting
Y -axis Full Scale
Unit
dB Reference
Spectrum Unit
Range- dB
Lin.- Log.
Delay Compensation
X-axis Start
Width
Probability Resolution
Lin.- Log.
Integration - Differentiation
Bowtie Correction Off