BRUEL & KJAER 2032 Instruction Manual page 4

SAFETY CONSIDERATIONS
This apparatus has been designed and tested according to Class II of IEC Publication
348, Safety Requirements for Electronic Measuring Apparatus, and has been supplied
in safe -condition. The present Instruction Manual contains information and warnings
which should be followed by the user to ensure safe operation and to retain the appa-
ratus in safe condition. Special note should be made .of the following:
APPLICATION OF POWER
Before each use of the apparatus, check that it is set to match the available mains
voltage and that the correct fuse is installed.
SAFETY SYMBOLS
.&.
The apparatus will be marked with this symbol when it is important that the
user refer to the associated warning statements given in the Instruction Manual.
.L
Chassis terminal
.J,.
Safety earth terminal
~
Hazardous voltage.
WARNINGS
Whenever it is likely that the correct function or operating safety of the apparatus has
been impaired, the apparatus must be made inoperative and be secured against unin-
tended operation.
Any adjustment, maintenance and repair of the open apparatus under voltage must be
avoided as far as possible and, if unavoidable, must be carried out only by trained
service personnel.