Module Diagnostics; Table 48 Module Diagnostics - WAGO 750 Product Manual

Diagnostics
Error
Code
1042
1043
1043

7.3.2 Module Diagnostics

Error
Code
2
3
5
5
1034
1035
1044
1045
72 Product manual | Version: 1.1.0
Proportional Valve Module 2-3-4
Chan- Event Qualifier
nel
Mode Type
No.
1 APPDIS WARN
0 APPDIS WARN
1 APPDIS WARN
Chan- Event Qualifier
nel
Mode Type
No.
128 APPDIS ERROR Undervoltage
128 APPDIS WARN
128 APPDIS ERROR Overtemperature switch-off thresh-
128 APPDIS WARN
128 APPDIS ERROR DI 1 limit switch actuated
128 APPDIS ERROR DI 2 limit switch actuated
128 APPDIS ERROR Communication with controller dis-
128 SINGLE ERROR Incompatible controller firmware
Cause of Error
Substitute value strategy, chan-
nel 2
JOG mode, standalone, channel 1 Eliminate local bus fault.
JOG mode, standalone, channel 2 Eliminate local bus fault.
Cause of Error
Overvoltage
old reached
Overtemperature warning thresh-
old reached
rupted
version
750-1632/000-100
Corrective Action
Eliminate local bus fault.
Table 48: Module Diagnostics
Corrective Action
Check power supply and/or wiring.
Check power supply and/or wiring.
Reduce output current and/or
check ambient temperature.
Reduce output current and/or
check ambient temperature.
–
–
Check power supply and/or wiring.
Send error report to WAGO Sup-
port