750-1632/000-100
4.2.6 HOLD Function
During a ramp, the current can be held using the HOLD function.
The HOLD function is controlled by means of the SPL_EN bit or, with corresponding pa-
rameterization, by one of digital inputs DI1 and DI2.
No.
1
2
3
Product manual | Version: 1.1.0
Proportional Valve Module 2-3-4
Event
Increase setpoint.
Set SPL_EN to "0"
Set SPL_EN to "1"
Figure 10: Setpoint Specification for the HOLD Function
Description/Behavior
Ramp starts.
Present current increases with parameterized ramp.
Ramp stops.
Present current is held.
Ramp restarts.
Present current is increased.
Functions
19