Stop Function; Figure 11 Setpoint Specification For Stop Function Via Digital Inputs - WAGO 750 Product Manual

Functions

4.2.7 STOP Function

With corresponding parameterization of DI 1 and DI 2, the STOP function can be trig-
gered via the digital inputs. For the STOP function, the stop ramp is applied.
No.
1
2
3
4
5
6
20 Product manual | Version: 1.1.0
Proportional Valve Module 2-3-4
Event
Set SPL_EN to "1."
Increase setpoint.
Set DI to "1."
Set DI to "0."
Set DI to "1."
Set DI to "0."
Figure 11: Setpoint Specification for STOP Function via Digital Inputs
Description/Behavior
Normal operation is activated.
Ramp starts.
Present current increases with parameterized ramp.
STOP function is triggered.
Current is reduced according to stop ramp.
STOP function is canceled.
Parameterized setpoint is approached again.
STOP function is triggered.
Current is reduced according to stop ramp.
Stop state is reached.
STOP function is terminated.
Parameterized setpoint is approached.
750-1632/000-100