Properties
3.4 Power Jumper Contacts
The potential for the field supply is fed in via the blade contacts and passed on via the
spring contacts.
For additional information on the Power Jumper Contacts, please see
& System Manual I/O System
No.
1
2
3
4
Arrangement in the Bus Node
For mechanical arrangement of the I/O module, the previous component must have at
least 2 open grooves for accommodating the blade contacts.
For electrical compatibility requirements see Section
10
Product manual | Version: 1.1.0
Proportional Valve Module 2-3-4
Type
Groove with spring contact
Blade contact
750/753.
8 Circuit Diagram
750-1632/000-100
Figure 4: Power Jumper Contacts
[} 11].