750-1632/000-100
Four parameterizable ramps are provided for the ramp function. The respective active
ramp is selected in the process output image (RSEL bits).
The slope of a ramp is defined in relation to the entire range of the setpoint. This allows a
setpoint jump by 100 % of the nominal value to be distributed across a parameterizable
time period of up to 10 s.
Value (SC_RISEn/SC_FALLn)
Product manual | Version: 1.1.0
Proportional Valve Module 2-3-4
Maximum Current Change after
1 ms
of the Maximum Control Value
0
Ramp generator deactivated
1
10
100
1000
10000
Figure 21: Ramp Generator
Table 22: Correlation: Resolution – Time
Limit Value Reached after
0.01 %
0.10 %
1.00 %
10.00 %
100.00 %
Figure 22: Startup ramp: 100 % in 1 ms
Functions
10000 ms
1000 ms
100 ms
10 ms
1 ms
47