Table 53 Signaling; Figure 49 Finite Automation - WAGO 750 Product Manual

Appendix
Signaling
In signaling mode, the handshake byte appears as follows:
Bit 7
0
Value
0x00
0x32
0x33
(other)
Finite Automation
Synchronization follows the chart below.
80 Product manual | Version: 1.1.0
Proportional Valve Module 2-3-4
Bit 6 Bit 5 Bit 4
0
Explanation
INVALID SIGNAL
RESET SIGNAL
ERROR SIGNAL
–
Bit 3 Bit 2 Bit 1
Signal
Description
Status of the process image without
being influenced by Mailbox 2.0
Shows that the local Mailbox 2.0 is
in the process of restarting.
Shows that the local Mailbox 2.0 is
in an error state.
Other values are not considered as
signals and are processed sepa-
rately in the Status or Control nib-
ble.
Figure 49: Finite Automation
750-1632/000-100
Bit 0
Table 53: Signaling