Holding The Present Actual Value ("Freeze"); Figure 15 End Stop Behavior In Jog Mode When The Present Actual Value Is Held ("Freeze") - WAGO 750 Product Manual

Table of Contents

Advertisement

750-1632/000-100

4.2.8.2.2 Holding the Present Actual Value ("Freeze")

No.
1
2
3
4
5
6
7
Product manual | Version: 1.1.0
Proportional Valve Module 2-3-4
Figure 15: End Stop Behavior in JOG Mode When the Present Actual Value Is Held ("Freeze")
Event
Set SPL_EN to "0"
Set JOG_POS to "1"
SetJOG_POS to "0"
Set DI to "1."
Set JOG_NEG to "1"
SetJOG_NEG to "0"
Set JOG_POS to "1"
Set DI to "1."
Set JOG_POS to "1"
SetJOG_POS to "0"
Description/Behavior
JOG mode is activated.
Present current is held.
Present current is increased.
The present current is then held until a new JOG_POS signal is
received.
Rising ramp stops.
Present actual value is held.
Present current is reduced.
Present current is held.
Present current is increased.
Rising ramp stops.
Present actual value is held.
Present current is increased.
Present current is held.
Functions
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

753

Table of Contents