Switching On The Server Nodes - Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual

Basic hardware procedures
4.12

Switching on the server nodes

CAUTION
▶
Follow the safety instructions in
Controls and indicators are the same for the CX2550 M6 and the
CX2560 M6.
▶ If applicable, connect all external cables to the server node.
Figure 61: Controls and indicators of the server node
1 ID indicator
▶ Press the On/Off button either on the rear or on the corresponding front
panel to start up the server node. The power-on indicator does lit green.
For more information, see
86
2
"Node-related indicators" on page
Upgrade and Maintenance Manual
"Important information" on page
On/Off button / Power-on indicator
25.
199.
CX400 M6