Sewing In Automatic Mode - Dürkopp Adler D869 e-con Operating Instructions Manual

104
Explanations of icons/symbols in Automatic mode:
Symbol/Icon
X
5.7.1

Sewing in Automatic mode

To sew in Automatic mode:
1. Select the program.
2. Press the pedal forward and sew.
 You can see the following on the control panel:
Programming Commander DELTA
Meaning
Selected program
Move to the next or previous step in seams/
segments - also during the seam
Abort a seam program
Seam/segment including information on the
settings for seam beginning, seam and seam
end
Display of the entire program including its
seams and segments.
Adjustment factors that can still be adjusted
during the seam
Grayed-out tiles for information on the set
parameters can be adjusted by programming
( p. 106).
Dark gray tiles can only be activated or deacti-
vated. You define which tiles will be visible by
programming ( p. 106).
Operating Instructions D869 e-con - 00.0 - 06/2023