Sewing In Automatic Mode - Dürkopp Adler D669 Operating Instructions Manual

98
5.7.1

Sewing in Automatic mode

To sew in Automatic mode:
1. Select the program.
2. Press the pedal forward and sew.
 You can see the following on the control panel:
Fig. 52: Sewing in Automatic mode
①
②
(1) - Progress in the segment
Possible actions in the course of the seam
The following table lists the functions that can be performed in the
course of the seam.
Button/Pedal Function
Go to the next or previous step in the seams/
segments
Push the pedal Lift sewing foot.
halfway back
Push the pedal Cut off or cancel the program.
fully back or The program remains stopped at the cutoff point.
cancel by
tapping the X
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
(2) - Progress in the program
Programming