Perform Software Update - Dürkopp Adler 867-M PREMIUM Service Instructions Manual

Programming
11. Press the OK button to confirm the selection.
12. Press the
13. Select the Destination option with the
14. Press the OK button to confirm the selection.
15. Select the desired folder with the
16. Press the OK button to confirm the selection.
17. Give the folder a name using the numeric buttons.
18. Press the OK button to confirm the name.
19. Press the
20. Press the OK button to confirm the selection.
 The data transfer begins and a message appears, stating that the
Fig. 109: USB key warning
 The message disappears after the data transfer.

20.11 Perform software update

When a new software version is available, this can be downloaded from
www.duerkopp-adler.com and loaded into the control via a USB key.
All settings on the machine are retained.
To load software via a USB key:
1. Switch off the machine at the main switch.
2. Plug the USB key into the socket (1) on the control (2).
Service Instructions 867-M PREMIUM - 03.0 - 05/2017
button; the selection Destination, Select All,
►
Deselect All appears.
and create a new folder with the CreateFolder option.
button and select the Copy option.
►
USB key must not be removed:
Don´t remove USB!
▲/▼
▲/▼
buttons or press the
Please Wait!
buttons.
button
►
+
139