Table of Contents
Advertisement
Operating Instructions 878-M PREMIUM - 06.0 - 11/2021
6.9 Performing a software update
A software update - for control panel or control - is always
performed on the control panel. The software of the control is
updated automatically whenever a software update is performed
for the control panel. The files necessary for updating the control
are already included in the file updates of the control panel.
To perform a software update:
1.
Log in as a user with the access rights necessary to perform
a software update (see p. 72 on how to define this setting).
2.
Download the software version from the Internet
(www.duerkopp-adler.com) and save it to a USB key.
3.
Plug the USB key into the port on the control panel.
4.
Open the burger menu and select the menu Settings –
Software Update.
A window listing the files stored on the USB key opens.
5.
Select the file containing the software update.
Another window opens.
6.
To start the software update, press on the Start Update
button.
7.
Wait until advised that the USB key can be removed OR
that the control panel was restarted.
Information
If detecting - while the control panel is being restarted - that the
software of the control requires an update as well, the system will
start this update automatically.
It may take up to 15 minutes for the system to complete the update
and restart the control panel successfully.
8.
Once the control panel has been restarted, the machine can
be used again.
9.
If you have not already done so, you can now remove the
USB key.
143
Advertisement
Table of Contents
