Installing Sd Memory Card - HindlePower Atevo Series Operating/Service Instructions Manual
Microprocessor-controlled float battery charger three phase input 16-1000 adc output
Hide thumbs
Also See for Atevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (316 pages)
Table of Contents
Advertisement
HindlePower Inc
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
6.5.1.
6.5.1. Installing SD Memory Card
Installing SD Memory Card
Purchasing the SD card through an ATevo supplier will ensure that it has been tested and
verified to work with the ATevo.
When installing the SD card, face the contacts down toward the Main Control Board. Gently
press the card into the socket until you feel the card locking mechanism 'click'. To remove,
gently press the card further into the socket then allow it to 'snap' back to disengage from the
locking mechanism. Pull the SD card out.
Last modified: 3 August 2023
Copyright HindlePower Inc. 2021
Page 147 of 311
Advertisement
Table of Contents
