Resetting Latched Relays (Legacy Method) - HindlePower Atevo Series Operating/Service Instructions Manual
Microprocessor-controlled float battery charger three phase input 16-1000 adc output
Hide thumbs
Also See for Atevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (316 pages)
Table of Contents
Advertisement
HindlePower Inc
5.1.5.
5.1.5. Resetting Latched Relays (legacy
Resetting Latched Relays (legacy
method)
method)
Latched relays can be RESET (or cleared) by pressing and holding the UP arrow button until
ATevo displays the RESET LATCHED ALARMS confirmation screen.
*
ATevo's Reset Latched Alarms function is identical to the Reset Latching Alarms
function on legacy AT30 chargers.
To select between clearing individual relays, or all relays, use the RELAYS menu icon as
described in
Section 7.6, Resetting Latched Alarm
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Relays.
Last modified: 8 September 2023
Page 127 of 311
Advertisement
Table of Contents
