Floor-Mounting (All Enclosures) - HindlePower Atevo Series Operating/Service Instructions Manual

Microprocessor-controlled float battery charger three phase input 16-1000 adc output
Hide thumbs Also See for Atevo Series:
Table of Contents

Advertisement

HindlePower Inc
1.7.1.

1.7.1. Floor-Mounting (all enclosures)

Floor-Mounting (all enclosures)
Floor-mounting is the standard method of installing all 3PH ATevo enclosure styles. When floor-
mounting ATevo, consider the following:
1. Refer to table below for external NEMA Type-1 outline drawing, overall dimensions,
mounting hole pattern, and hardware mounting specs.
2. Be conscious of planned ac input and dc output wiring to the ATevo selecting conduit
entrances carefully.
3. Location requirements:
a. Free of drips and splatter. If falling particles and liquids are a problem, install a
NEMA Type-2 drip shield accessory.
b. Between 0 and 122 °F / -18 and 50 °C, with relative humidity between 0% and 95%
non-condensing.
c. Must be free of flammable or explosive materials.
4. Maintain at least 6in /152mm of free air on all vented surfaces for cooling.
5. Allow 36in /914mm front clearance for operation and maintenance.
PROCEDURE
PROCEDURE
1. Install four anchor bolts (not supplied with unit) into the floor.
2. Refer to table below for anchor bolt size and mounting dimensions.
3. Carefully lift the ATevo above the anchor bolts, guide the enclosure onto the floor bolt
pattern and lower it into place.
4. Add appropriate mounting hardware to the anchor bolts and tighten securely.
ATevo
ATevo STANDARD
STANDARD NEMA
Enclosure Style
Enclosur
e Style
Outline Drawing
Outline Drawing
Overall Height
Overall Height
Overall W
Overall Width
Overall Depth
Overall Depth
Mounting WW
Mounting
Copyright HindlePower Inc. 2021
NEMA-1 -1 ENCLOSURES
ENCLOSURES (3PH)
-5070
-5070
JE5331-00
38.46in
977mm
19.87in
idth
504mm
18.55in
471mm
17.87in
WW
505mm
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
(3PH)
-5030
-5030
-163
-163
JE5337-00
JE5361-00
54.25in
62.62in
1378mm
1591mm
30.00in
42.25in
762mm
1073mm
19.14in
25.06in
486mm
637mm
27.95in
40.50in
710mm
1029mm
-198
-198
JE5351-00
80.00in
2032mm
58.00in
1473mm
30.00in
762mm
52.01in
1321mm
Page 18 of 311

Advertisement

Table of Contents
loading

This manual is also suitable for:

Atevo o&si-3ph

Table of Contents