HindlePower Atevo Series Operating/Service Instructions Manual page 211
Microprocessor-controlled float battery charger three phase input 16-1000 adc output
Hide thumbs
Also See for Atevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (316 pages)
Table of Contents
Advertisement
HindlePower Inc
12.1.1.
12.1.1. Relays
Relays
The Auxiliary I/O Board (A4) contains six (6) configurable one (1) form-C relays. Relay contacts
are rated for 0.5A @ 125 Vac/Vdc.
Each relay has:
• a RED LED that serves as a debugging aid that illuminates when the relay is in alarmed
state
• a second contact set which feeds back the relay's state to ATevo's main processor
Each relay is configurable to:
• change states based on any alarm condition or status point
• be latching or non-latching
• switch to active state after a pre-programmed delay
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Last modified: 3 August 2023
Page 211 of 311
Advertisement
Table of Contents
