Binary Input Action Assignment - HindlePower Atevo Series Operating/Service Instructions Manual
Microprocessor-controlled float battery charger three phase input 16-1000 adc output
Hide thumbs
Also See for Atevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (316 pages)
Table of Contents
Advertisement
HindlePower Inc
12.5.5.
12.5.5. Binary Input Action Assignment
Binary Input Action Assignment
The Binary Input Action assignment links the binary input to a changer control. Examples of a
charger control include rectifier remote shutdown, or float/equalize mode control. ATevo will
execute assigned charger control when the binary input is in the active state.
To assign a control to a binary input:
MENU > AUX INPUTS > 'Binary Input Configuration' > select input from options (refer to
Section
12.5.1) > 'Action:' > select from 2 actions
*
Midway through 2021, ATevo chargers began shipping with firmware v2.7.0 which
includes a new action called "Disable Equalize" which is described further in the
Appendix topic, Firmware v2.7.0 Enhancements.
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Last modified: 3 August 2023
Page 233 of 311
Advertisement
Table of Contents
