HindlePower Atevo Series Operating/Service Instructions Manual page 303

HindlePower Inc
17.1. 17.1. Safety Symbols Safety Symbols
!
SAFETY INSTRUCTIONS – PLEASE READ AND FOLLOW TO AVOID SERIOUS INJURY
OR DEATH
SYMBOL SYMB OL
Copyright HindlePower Inc. 2021
MEANING MEANING
Imminently hazardous situation, which if not avoided, WILL result in
death or serious injury.
Potentially hazardous situation, which if not avoided, could result in
death or serious injury.
Potentially hazardous situation, which if not avoided, could result in
minor or moderate injury (e.g. minor burns, bruising from pinch points,
minor chemical irritation). May also be used to alert against unsafe
practices.
Important information not related to personal injury (e.g. messages
related to equipment or property damage).
LOCKOUT TAGOUT is required before servicing.
VENTILATION MANDATORY. Maintain at least 6in / 152mm of free air on
all vented surfaces for cooling. Allow sufficient clearance to open front
panel for servicing.
Refer to manual.
SAFETY ALERT. Indicates that a hazardous situation exists. TO REDUCE
RISK OF INJURY OR DEATH, refer to accompanying documents, and
follow all steps or procedures as instructed.
DANGEROUS HIGH VOLTAGE inside product enclosure.
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, do not attempt to open
enclosure or gain access to areas where you are not instructed to do so.
SERVICING IS TO BE DONE ONLY BY QUALIFIED SERVICE PERSONNEL.
Allow at least 3 minutes for internal components to discharge to a safe
level after performing lockout tagout to prevent exposure to
DANGEROUS HIGH VOLTAGE.
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Page 303 of 311