HindlePower Atevo Series Operating/Service Instructions Manual page 307

HindlePower Inc
17.4. 17.4. WARNING WARNING
!
Potentially hazardous situation, which if not avoided, could result in death or
serious injury.
SYMBOL SYMB OL INSTRUCTION INSTRUCTION
Do not install ATevo outdoors, or in wet or damp locations, unless specifically equipped
for that environment.
Remove all jewelry, watches, rings, etc. before proceeding with installation or servicing
to avoid electrical shock hazards.
Do not operate ATevo with any power source that does not match the specified ac and
dc voltage ratings. Refer to the data nameplate decal affixed to the outside panel for
operational requirements.
Do not operate ATevo with the safety shield or any other supplied guards removed or
improperly installed.
Do not operate ATevo if it has been damaged in any way. Refer to qualified service
personnel.
Before using ATevo, read all instructions and cautionary
markings on: a) this equipment, b) battery, and c) any other equipment to be used in
conjunction with ATevo
Do not use ATevo for ANY purpose not described in this manual.
Turn OFF ATevo before connecting or disconnecting the battery to avoid electrical shock
hazards, arcing, burning, and/or equipment damage.
De-energize and lock out all ac and dc power sources to ATevo before servicing.
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Page 307 of 311