HindlePower Inc
6.4.5.
6.4.5. Logging into a Password
Logging into a Password
Authorization Level
Authorization Level
If you attempt to access a feature or change a parameter that is configured at a higher
privilege level than DEFAULT ACCESS (or the present level), ATevo will prevent the action. You
will need to log in at the configured privilege level (or higher) to proceed.
To LOG IN to a privilege level, select 'LOG IN', select the level you wish to access, and enter the
password.
If the entry is correct, you will be able to access all features at the privilege level. However, if
no buttons are pushed for more than ten minutes, ATevo will switch back to DEFAULT ACCESS
level.
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Last modified: 3 August 2023
Page 144 of 311