HindlePower Inc
The AC Input Circuit Breaker (CB1) is located on the left. When opened, this device disconnects
ATevo internal components from the ac voltage source, except for the breaker terminals
(CB1-L1/L2/L3), where the ac input feed is connected.
The DC Output Circuit Breaker (CB2) is to the right. When opened, this device disconnects
ATevo output from the dc bus (battery) voltage.
There still may be live dc power connected to some of ATevo's internal boards
(this will include any relays wetted by the battery voltage).
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Last modified: 13 September 2023
Page 59 of 311