HindlePower Atevo Series Operating/Service Instructions Manual page 82
Microprocessor-controlled float battery charger three phase input 16-1000 adc output
Hide thumbs
Also See for Atevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (316 pages)
Table of Contents
Advertisement
HindlePower Inc
4.2.
4.2. Configuring Basic Set Points &
Configuring Basic Set Points &
Alarms
Alarms
The ATevo is the second generation of the AT Series microprocessor-controlled float battery
chargers. Because its configuration button sequence is identical, users of legacy AT30 chargers
will easily adapt to ATevo. This section details how to configure basic ATevo set points and
alarms found also on legacy AT30 chargers. The process is shown by both (1) video and (2)
instructions with screenshots.
Instructions by Video
Instructions by Video
https://www.youtube.com/embed/VjuwjKU7Kt4?rel=0&start=39&end=82
https://www.youtube.com/embed/VjuwjKU7Kt4?rel=0&start=39&end=82
https://www.youtube.com/embed/VjuwjKU7Kt4?rel=0&start=107&end=185
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Page 82 of 311
Advertisement
Table of Contents
