HindlePower Atevo Series Operating/Service Instructions Manual page 199

HindlePower Inc
10.4. 10.4. Temperature Compensation Temperature Compensation
Curves Curves
The following graph depicts the dc voltage correction applied to ATevo output based on battery
temperature sensed by the TempCo probe (A10).
EXAMPLE EXAMPLE
Suppose you are dealing with a lead-acid battery whose temperature is 100 °F / 37.8 °C. As
shown on the graph, the dc output voltage should be approximately 97% of the 77 °F voltage.
If the float voltage is set on the front panel to 132 Vdc, the actual output voltage will be:
132 × 0.97 = 128 Vdc
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Last modified: 3 August 2023
Page 199 of 311