Internal Component Layout Drawings - HindlePower Atevo Series Operating/Service Instructions Manual

HindlePower Inc
200 A 200 Adc dc
250 A 250 Adc dc
300 A 300 Adc dc
400 A 400 Adc dc
500 A 500 Adc dc
600 A 600 Adc dc
800 A 800 Adc dc
1000 Adc 1000 A dc
The individual drawings featured in these binders include:
• Enclosure Outline Drawings

• Internal Component Layout Drawings

• Control Panel / PC Board Detail Drawings
• Electrical Schematics
• Connection (Wiring) Diagrams
*
To supplement the following 'standard' drawings, a customized record drawing
package is available for every 3PH ATevo battery charger. This set of documents
features a unit-specific drawing list / data nameplate detail, enclosure outline,
itemized internal component layout, electrical schematic with component
ratings, and a full connection diagram. Contact your Sales Representative for
drawing availability from the battery charger manufacturer.
Copyright HindlePower Inc. 2021
JH0012-24 (opt) JH0012-24
JH0012-04 (std) JH0012-04
JH0012-24 (opt) JH0012-24
JH0012-04 (std) JH0012-04
JH0012-24 (opt) JH0012-24
JH0012-04 (std) JH0012-04
JH0012-24 (opt) JH0012-24
JH0013-01 (std) JH0013-01
JH0013-21 (opt) JH0013-21
JH0013-01 (std) JH0013-01
JH0013-21 (opt) JH0013-21
JH0013-01 (std) JH0013-02
JH0013-21 (opt) JH0013-22
JH0013-02 (std) JH0013-02
JH0013-22 (opt) JH0013-22
JH0013-02 (std) JH0013-02
JH0013-22 (opt) JH0013-22
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
(opt) JH0012-24 (opt)
(std) JH0012-04 (std)
(opt) JH0012-24 (opt)
(std) JH0013-01 (std)
(opt) JH0013-21 (opt)
(std) JH0013-01 (std)
(opt) JH0013-21 (opt)
(std) JH0013-01 (std)
(opt) JH0013-21 (opt)
(std) JH0013-02 (std)
(opt) JH0013-22 (opt)
(std) JH0013-02 (std)
(opt) JH0013-22 (opt)
(std) JH0013-02 (std)
(opt) JH0013-22 (opt)
(std) JH0013-02 (std)
(opt) JH0013-22 (opt)
Last modified: 19 September 2023
JH0013-21 (opt)
JH0013-01 (std)
JH0013-21 (opt)
n/a
JH0013-02 (std)
JH0013-22 (opt)
JH0013-02 (std)
JH0013-22 (opt)
n/a
n/a
n/a
n/a
Page 291 of 311