HindlePower Atevo Series Operating/Service Instructions Manual page 122
Microprocessor-controlled float battery charger three phase input 16-1000 adc output
Hide thumbs
Also See for Atevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (316 pages)
Table of Contents
Advertisement
HindlePower Inc
5.1.1.
5.1.1. Changing Display Mode
Changing Display Mode
The DISPLAY MODE button selects the HOME Screen display choices:
• DC Voltage and Current (Vdc / Adc output)
• Date and Time (refer to
• Ground Meter (refer to
• Rectifier Temperature (refer to
• AC Meter – optional (refer to JA5124-03)
• Battery Current Meter – optional (refer to JA5124-07)
To change Display Mode:
DISPLAY MODE > one of 6 displayed choices
*
The DISPLAY MODE button is in the same relative location as the METER MODE
button on legacy AT30 chargers. Its functionality is equivalent in that it
determines which measurements are to be shown on the HOME screen.
Copyright HindlePower Inc. 2021
https://www.youtube.com/embed//bEc7qvyGcBY?rel=0&start=8
Section
3.2.5)
Section 3.2.5
Section
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
and/or JA5124-09)
3.2.5)
Last modified: 8 September 2023
Page 122 of 311
Advertisement
Table of Contents
