HindlePower Atevo Series Operating/Service Instructions Manual page 228

HindlePower Inc
12.5. 12.5. Software Configuration for Binary Software Configuration for Binary
Inputs Inputs
The Auxiliary I/O Board (A4) binary inputs are used to monitor, alarm, and/or report on the
status of any external switch or contact. Each input can be independently configured to be
active high or low, activate an alarm, and/or activate a control. ATevo assigns each input a
unique generic name that may be replaced by the user.
*
Software Configuration Naming: In the following subsections, Auxiliary I/O Board
binary inputs default names are specified by board number (see Section 12.3.1),
and binary input number on the associated board. For example: 'Aux 1 input B2'
specifies binary input #2 on Auxiliary I/O Board #1.
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Last modified: 1 August 2023
Page 228 of 311