HindlePower Atevo Series Operating/Service Instructions Manual page 207
Microprocessor-controlled float battery charger three phase input 16-1000 adc output
Hide thumbs
Also See for Atevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (316 pages)
Table of Contents
Advertisement
HindlePower Inc
11.5.
11.5. Disabling Remote Sense
Disabling Remote Sense
If you need to temporarily disable Remote Sense:
• De-energize and lock out all ac and dc voltages within the ATevo enclosure.
• Check with a voltmeter.
• Remove the safety shield.
• Move SHORTING BLOCKs to Local Sense configuration per
• Replace safety shield and close front panel door.
• Re-energize ATevo.
*
If Remote Sense is to be disabled for extended periods of time or permanently
disabled, it is highly recommended that the sense leads (the twisted pair cable)
be disconnected from both the battery and terminal block (A2-TB1).
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Section
11.4.3.
Last modified: 2 August 2023
Page 207 of 311
Advertisement
Table of Contents
