HindlePower Atevo Series Operating/Service Instructions Manual page 69

HindlePower Inc
3.3.3. 3.3.3. Navigation Conventions in this Navigation Conventions in this
Manual Manual
In the previous two (2) pages, we showed a sequence of commands and the sequence of
screens caused by those commands. That example was provided to illustrate the use of the UP,
DOWN, LEFT, RIGHT arrow buttons, and the EDIT/ENTER button for navigation.
The full command sequence shown was:
1. Press MENU to open the Main Menu screen.
2. Press DOWN to select EVENT LOGS.
3. Press EDIT/ENTER to open 'Event Logs' screen.
4. Press UP OR DOWN arrows to navigate to 'View event log'.
5. Press EDIT/ENTER to open an event log screen.
Using a full command sequence with every command in this manual would lead to needless
repetition and tedious document length. As the above example illustrates, most of the
repetition comes from listing every navigation button push. ATevo uses a simple, nearly
universal navigation system that is used by most tv remote controls. It is not necessary to list
the following navigation button pushes: UP, DOWN, RIGHT, LEFT or EDIT/ENTER. This
convention results in a streamlined sequence of ATevo-specific commands.
For our example, this is:
1. Press MENU to open the Main Menu screen.
2. Execute the EVENT LOGS command on the Main Menu.
3. Execute the 'View event log' command on the Events Logs screen.
To simplify further, we use a shorthand convention that makes use of the '>' character
between commands.
Navigation Convention: Navigation Convention: Command > Command > Command
With this convention, the previous example's command sequence is:
MENU > EVENT LOGS > 'View event log'.
Scr Screen Convention: een Convention:
In the same way that the character '>' is used between commands
in a sequence, the same character appears between a sequence of
screens.
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Page 69 of 311