HindlePower Atevo Series Operating/Service Instructions Manual page 227

HindlePower Inc
12.4.5. 12.4.5. Factory Default Alarm Relay Factory Default Alarm Relay
Configuration Configuration
Unless otherwise specified, the ATevo Auxiliary I/O Board (A4) will ship from the factory with the
following Alarm Relay Configuration:
Copyright HindlePower Inc. 2021
F F actory Default Alar actory Default Alarm R
R R elay elay Name Name
. #1 High DC Voltage
. #2 Low DC Voltage
. #3 DC Output Failure
. #4 Low AC Supply
. #5 Positive Ground Fault
. #6 Negative Ground Fault disabled 30 seconds
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
m Relay Configuration elay Configuration
Latching Delay Latching Delay
disabled 30 seconds
disabled 30 seconds
disabled 30 seconds
disabled 30 seconds
disabled 30 seconds
Last modified: 1 August 2023
Page 227 of 311