HindlePower Inc
the respective option is installed. Examples are "Battery overtemp" and "Battery temp probe fail";
these are visible only if a battery temperature probe is installed and enabled.
For more information about how to upgrade firmware, see either
depending on the ATevo product you purchased:
•
Originally supplied with firmware v2.6.6 or earlier
•
Originally supplied with firmware v2.7.0 or later
Copyright HindlePower Inc. 2021
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
Section 6.5.4
Last modified: 3 August 2023
or 6.5.5,
Page 298 of 311