HindlePower Atevo Series Operating/Service Instructions Manual page 81
Microprocessor-controlled float battery charger three phase input 16-1000 adc output
Hide thumbs
Also See for Atevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (316 pages)
Table of Contents
Advertisement
HindlePower Inc
ATevo O&SI - 3PH Input (16-1000 Adc) - 1.1_en
4.1.5.
4.1.5. HOME Screen
HOME Screen
The default HOME screen appears after power up showing the dc bus voltage and dc charger
current, along with the status for CHARGER MODE and EQUALIZE METHOD on the top line.
CHARGE MODES and EQUALIZE METHODS are described in
Section 5.1, ATevo Operating
Modes.
ATevo will automatically switch back to the HOME screen if no buttons are pushed for ten (10)
minutes, or by pressing ESC one or more times. Each press of ESC returns one level until HOME
is reached.
Last modified: 3 August 2023
Copyright HindlePower Inc. 2021
Page 81 of 311
Advertisement
Table of Contents
