ABB AC500 PLC Hardware Manual page 823

1.7.2.3.13 Technical Data
The System Data of AC500 and S500
valid for standard version.
The System Data of AC500-XC
valid for the XC version.
Only additional details are therefore documented below.
Technical Data of the Module
Parameter
Rated supply voltage of the module
Current consumption of the module (UP)
Process voltage UP
Max. power dissipation within the module
Number of digital inputs
Number of configurable digital inputs/outputs 16
Reference potential for all digital inputs and
outputs
Address setting
Diagnosis
Operating and error displays
Weight (without terminal unit)
Mounting position
Cooling
2019/04/17
Rated value
Max. current loadability for the supply
terminals
Protection against reversed voltage
Rated protection fuse at UP
Electrical isolation
Inrush current from UP (at power-up)
Current consumption from UP at normal
operation / with outputs
Connections
NOTICE!
Attention:
All I/O channels (digital and analog) are protected against reverse polarity,
reverse supply, short circuit and continuous overvoltage up to 30 VDC.
3ADR010121, 13, en_US
Ä Chapter 2.6.1 "System Data AC500" on page 1248 are
Ä Chapter 2.7.1 "System Data AC500-XC" on page 1309 are
Value
24 V DC (UP/ZP)
15 mA
24 VDC (for inputs and outputs)
10 A
Yes
10 A fast
CS31 bus interface from the rest of the module
0.040 A²s
0.1 A + max. 0.008 A per input + max. 0.5 A per
output
Terminals 1.8 - 4.8 for +24 V (UP) and 1.9 - 4.9
for 0 V (ZP)
6 W (outputs unloaded)
8
Minus pole of the supply voltage, signal name
ZP
With 2 rotary switches on the front panel
Diagnosis and Displays
"Diagnosis" on page 820
32 LEDs altogether
Ca. 125 g
Horizontal
Or vertical with derating (output load reduced to
50 % at 40°C per group)
The natural convection cooling must not be hin-
dered by cable ducts or other parts in the
switch-gear cabinet.
Device Specifications
Communication Interface Modules (S500) > CS31
Ä Chapter 1.7.2.3.11
823