ABB AC500 PLC Hardware Manual page 1074

Device Specifications
Communication Interface Modules (S500) > PROFINET
1.7.6.4.5 Addressing
1.7.6.4.6 Parameterization
Parameters of the Module
Name
Module ID
Parameter length Internal
Error LED / Fail-
safe function
see table
Remarks:
1
) With a faulty module ID, the module reports a "parameter error" and does not perform cyclic
process data transmission
Table 181: Error LED / Failsafe function
Setting
On
Off by E4
Off by E3
On + Failsafe
Off by E4 + Failsafe
Off by E3 + Failsafe
1074
For further information regarding wiring and cable types see chapter Ethernet
Ä Chapter 2.6.4.10 "Ethernet Connection Details" on page 1288.
The module reads the position of the rotary switches only during power-up, i. e.
changes of the switch position during operation will have no effect until the next
module initialization.
Value
Internal
1
)
On
Off by E4
2
)
Off by E3
On + failsafe
Off by E4 + fail-
safe
Off by E3 + fail-
safe
Description
Error LED lights up at errors of all error classes, Failsafe-mode
off
Error LED lights up at errors of error classes E1, E2 and E3,
Failsafe-mode off
Error LED lights up at errors of error classes E1 and E2, Fail-
safe-mode off
Error LED lights up at errors of all error classes, Failsafe-mode
on
Error LED lights up at errors of error classes E1, E2 and E3,
Failsafe-mode on
Error LED lights up at errors of error classes E1 and E2, Fail-
safe-mode on
3ADR010121, 13, en_US
Internal value Internal value,
type
7010 WORD
33 BYTE
0 BYTE
1
3
16
17
19
2
)
Default
7010
33
0
2019/04/17