ABB AC500 PLC Hardware Manual page 1170

Device Specifications
Accessories > S500
Purpose The Pluggable Marker Holder is used to hold 4 marking stripes, on which the meaning of the I/O
channels of I/O modules can be written down. The holder is transparent so that after snapping it
onto the module the LEDs shine through.
Handling The marking stripes can be printed out from TA563.doc
Instructions http://new.abb.com/products/ABB1SAP180500R0001.
Technical Data
Parameter
Use
Mounting
Weight
Dimensions
Ordering Data
Part No.
1SAP 180 500 R0001
1.8.4.4 TA525 - Plastic Markers
Accessory to label AC500 and S500 modules.
1170
Description
TA523, Pluggable Marker
Holder (10 pieces)
*) For planning and commissioning of new installations use modules in Active
status only.
3ADR010121, 13, en_US
Value
For labelling channels of I/O modules
Snap-on to the module
20 g
82 mm x 67 mm x 13 mm
Product Life Cycle Phase *)
Active
2019/04/17