Table of Contents
Advertisement
System Assembly, Construction and Connection
AC500-eCo > Handling of Accessories
Intended Pur-
The TA563-TA565 terminal blocks are used to connect process signals and process voltages to
pose
AC500-eCo I/O modules and AC500-eCo processor modules (with -P extension inside their
type designator only). 3 different kind of terminal blocks are available:
●
Screw terminals with cable insertion on the side
●
Screw terminals with cable insertion on the front
●
Spring terminals with cable insertion on the front
Of each kind, 2 sizes are available:
●
Terminals with 9 poles
●
Terminals with 11 poles.
There are 2 compatible variants of each kind and size.
Technical Data
Table 212: Screw-type Terminals (TA563/TA564)
Parameter
Type
Conductor cross section
Stripped conductor end
Width of the screwdriver
Fastening torque
Degree of protection
Conductor cross section flexible, with ferrule
with/without plastic sleeve
Table 213: Spring Terminals (TA565)
Parameter
Type
Conductor cross section
Stripped conductor end
Degree of protection
Conductor cross section flexible, with ferrule
with/without plastic sleeve
1242
WARNING!
For screw terminals only: Danger of death by electric shock!
The IP 20 protection degree is only provided if all terminal screws are tightened.
Tighten all screws of unused load terminals of relay outputs if voltages > 24 V
are connected to the relay group.
Solid
Flexible
TA563
TA564
Solid
Flexible
3ADR010121, 13, en_US
Value
Front terminal or side terminal (depending on
model)
0.5 mm
2
to 2.5 mm
2
2
2
0.5 mm
to 2.5 mm
8 mm
10 mm
3.5 mm
0.4 Nm - 0.5 Nm
IP 20 (if all terminal screws are tightened)
2
Min. 0.25 mm
Max. 1.5 mm
2
Value
Front terminal
0.5 mm
2
to 2.5 mm
2
2
2
0.5 mm
to 2.5 mm
10 mm
IP 20
Min. 0.25 mm
2
Max. 1.5 mm
2
2019/04/17
Advertisement
Chapters
Table of Contents
